Best Mech Mods in 2022
A mechanical mod also referred to as a mech mod, is a simple yet powerful vaping device that boasts of fantastic potential. A mech mod vape is not a fit for all products; it needs particular attention and recurrent maintenance.
The majority of mechanical mods are tubes made of metal, but some of them are shaped like a box (they are called mechanical box mods). Authentic mech mods do not have any electronic parts in them, unlike regulated vaping mods that have recently taken over the market.
- Brass + stabilized wood construction
- Hybrid connection
- 4 spring firing switch
- Stabilized wood tube sleeves
- Matching wood and resin box
- Powered by single 18650 battery (battery sold separately)
- 510 threading connection
Omega Coil is the second mech mod of Ultroner, which adopts high purity brass to reduce the internal resistance of stabilize wood and to improve electrical conductivity. Omega Coil used single 18650 battery. Moreover, stable wood is applied on its pipe casing with a waistline style and a carved design for a more comfortable grip.
- Material: Naval standard brass
- Proprietary X chip inside (removable)
- Voltage Range: 3.2V-4.2V
- Resistance Range: 0.1-2.5ohm
- 2-1 Hybrid Design
- Smart Protection Mode (Battery type 18650)
- Full Mechanical Mode (Battery type 18650/20700/21700)
- Safety Protection
- Short circuit protection
- High-temperature protection
- Low voltage protection
- 10 seconds cut-off
- Instant Fire
- 0.1ohm Support
- Low Voltage Drop
- Innovative Fire Button: Tauren Wrench / Arcless Design / Spring-Loaded / Silver-Plated Contact / Extruded Design / 360 Degree Contact Ball Firing / Liquid Proof / Dust Proof / Shock Proof
- Lockable System: Satisfying tactile click locking response
- 510 threading connection
- Copper construction
- Button type: Magnet/Spring
- 1090 craft, CNC carving with laser carving
- Each product has a serial number (18650 top and 20700 top cap has the same serial number)
- Hidden heat dissipation holes
- Contact pin: Copper material with silver electroplating
- PEEK Insulating material
- 510 threading connection
- Powered by single 18650/20700 battery (battery sold separately)
- Material: Stainless Steel
- Height: 99.2mm
- Diameter: 25.2mm
- Colors: Silver, Gunmetal, Black
- Adopts 3S Chipset
- Battery: Single 21700/20700
- 18650 Battery Adapter Included
- Working Mode: Bypass
- Intelligent LED Indicator Light
- Green Light: 3.8V Or Above
- Blue Light: 3.4V-3.8V
- Red Light: 3.4V Or Below
- Short Circuit Protection
- Reversed Battery Connection Protection
- Over-Current Protection
- High-Temperature Protection
- 10S Cut Off Protection
- Nano-Coating Chip To Avoid Water/Liquid Intake
Check the Vapefly Siegfried Tube Mod, made of stainless steel material, with CNC engraving and corrosion craftsmanship, looks exquisite. equipped with the 3S smart chipset to provide multiple protection to ensure the vape safe and reliable, powered by a single 21700 or 20700 battery, ensures the continuous power supply, the 18650 adapter included, there is intelligently LED indicator light at the upper part of the power button, will show you the battery life clearly. recommend works with Siegfried Mesh RTA.
What is a mechanical mod?
There are many reasons why enthusiast vapers like mech mods. First of all, these devices work with high-amperage 18650 batteries. There are also users who enjoy mechanical vape mods because of their collectible qualities. Some mech mods have stylish parts made of precious metals.
Taken altogether, all types and kinds of mech mods are simple to use and reliable. There are no electronics to fail, and if you maintain your device properly, there is a chance that your mech mod will be your friend for decades. Isn’t it awesome?
The Evolution of Mech Mods
Mech mods saw the world back in the times when cigarette-alike products ruled the market. Many users were unhappy that the batteries of their devices died too soon and that the devices were not powerful enough. Vaporizer manufacturers saw this and looked at other, more powerful, devices for inspiration.
As they were looking around, they noticed that miniature flashlights had impressively powerful 18650 batteries. So, innovators of the vape market turned such flashlights into vaporizers successfully.
For this reason, you can still find an explanation that mods are called mods because they were initially modified flashlights. It wasn’t very hard to turn a flashlight into a vaping device though. An average flashlight consists of a negative and a positive terminal (they complete a circuit), a tube with a battery and a light bulb.
To turn a flashlight into a vaping device, one simply had to replace the bulb department with a housing with the atomizer. Of course, such mods were very primitive-looking and simple, and the market offers much more sophisticated products nowadays.
Elements of a Mech Mod
Most mechanical vapes consist of the following three elements: a body, a switch, and a connector. The latter two come in a wide variety of styles and types. Let’s have a closer look at the construction of a simple tube mod to understand the function of each part better.
The mech mod body is the simplest part of the device. It houses the battery and connects the switch and the connector. The performance and durability of the mech mod depend significantly on the material of its body. Poor quality can lead to voltage loss in some cases. It is always better to opt for highly conductive metals and precise threads.
As for the switch of a mech mod, it is usually a bottom cap of the device. Switch contacts the negative part of the battery. When a user presses the button of the switch, the mod is activated, and the battery transmits power to the atomizer. There are magnet switches as well as spring switches.
Speaking about functionality, magnetic switches usually work better because the material of the spring can affect the productivity of the whole device. High-end mechanical mods typically have magnetic switches.
The mech mod connector is its third constituent part. Its work is to connect the atomizer with the positive end of the battery. In traditional connectors, a metal pin is used to make the connection. The quality of conduction depends on the metal in the first place. You can also find mech mods with hybrid connectors (without the pin, direct battery contact).
What’s more, you can even find mods without any connectors at all (the atomizer is screwed onto the tube directly). Even though hybrid connectors perform better, they require more care as well. Such connectors can vent the mod battery when they are used not as intended.
Mech Mod Materials and Their Advantages
As already noted above, mech mod materials vary in different devices. Each material has its pros and cons. Below you will find an overview of the most frequently used materials, as well as their pros and cons.
Stainless steel is the easiest mech mod material to maintain. It’s an affordable material that you will not need to polish. Usually, the 304 grade of stainless steel is used in mech mods. The same type of steel is used for sinks and kitchenware.
There are also mech mods with the 316L grade of stainless steel, but those cost much more. This type of steel is usually found in expensive watches. The only disadvantage of this material is that it is less conductive than copper and brass.
Brass is an alloy made of the three metals, namely tin, zinc, and copper. Brass has better conductivity, but it requires more maintenance compared to stainless steel. You will need to clean the threads pretty often, and if the tarnished look is not your thing, you will need to clean and polish your device quite often as well.
There are different grades of brass. The alloys which have more copper cost more because the performance of copper is higher compared to the other two constituent metals. There is naval brass (60% copper), admiralty brass (70% copper), and aluminum bronze (90% copper). More copper means less corrosion as well.
If you are very concerned about the performance of your device, choose copper. It is the most conductive material that can be usually found in the best mech mods. However, copper requires maintenance as well, because it can tarnish. It’s also a soft metal that is easier to scratch, compared to stainless steel and brass.
Copper mods are usually pretty expensive, especially if we speak of beryllium copper (99% copper). The less oxygen copper has, the better performance it provides. The grade of the metal reflects the copper content in contrast to the oxygen.
The material of the Pin
Traditional mech mod connectors use pins made of different materials. The best mechanical mods have silver plating, as this metal is highly conductive and provides maximum performance. Gold is also a good choice because it is resistant to corrosion and requires little maintenance.
Remember that the thickness of the coating matters a lot. A thin chip layer will not bring you many benefits and will wear off quickly. There are pins without any plating. Those are usually made of stainless steel, brass or copper.
Maintenance of silver, brass, and copper
If you have a plated pin, you need to take care of it in a certain way. If you have a gold-plated pin, wash it regularly with a mild detergent to remove any residues and dirt. As for silver plating, you can clean it easily with the help of aluminum foil and baking soda.
Take a bowl, put a tablespoon of baking soda into it, add boiling water. Crumble some aluminum foil and put it into the bowl together with the pin. A chemical reaction will take place and clean the pin perfectly for you.
Pins without plating are much easier to maintain, especially if we are talking about stainless steel. You can wash your stainless steel mech mod with mild dish soap. A toothbrush will be very helpful for cleaning the threads.
If you have a brass or a copper mod, you can clean it using automotive metal polish. You need to protect your hands and respiratory system when using a harsh polish. It is also possible to clean your mod with ketchup (due to vinegar in it), but things could eventually get messy.
What Qualities Should You Look for in a Mech Mod?
A good choice of metal is crucial for the performance of your mech mod. One more thing you need to decide is whether you value high performance or low maintenance more.
The level of service support matters a lot, too. If you want to spend as little time as possible on cleaning and maintaining your device, go for stainless steel mech mods.
They are also a safe bet if you are feeling clumsy. If mechanical mods authentic look is what matters most to you, go for gold or silver-plated models.
If performance is your key interest, opt for high-end copper or brass mech mods. The durability of a mech mod and its workmanship are two more factors to consider.
Conductivity and performance depend on the metal type, but they also depend on the accurateness of machining. Every loose mech mod connection can be a reason for voltage loss.
A well-crafted mech mod won’t have this problem. The safety of a mech mod is another crucial factor to consider. Pay attention to the quality of workmanship when choosing a mech mod, because a battery failure could possibly cause troubles.
Service and support are important too because when you buy a product from a company that is ready to back it up, it means that you won’t be throwing your money away. It’s always better to choose a company that offers support to its customers.
Mechanical mods are authentic devices that are definitely not for every vaper. Such vapes demand more attention, maintenance, and experience. However, many enthusiastic, experienced vapers enjoy them and wouldn’t exchange them for the most advanced electronic devices.
The main advantage of a mech mod is that with proper maintenance it can be your reliable friend for a lifetime. Being classy yet affordable, they keep conquering the hearts of vapers all over the world.