The Joyetech Exceed Grip Pro is a small pod mod. In the arsenal of the device there is a battery with high power rating, and the manufacturer has also introduced a chipset on the basis of which control is carried out. For the device to work, replaceable coils are needed, as an alternative, an RBA base can be installed, this option is suitable for advanced users.
The appearance of the device is presented in the form of the original form factor, the manufacturer has not made major design changes, so the device is similar to the previous models of this series. The introduction of the chipset opens up access to the selection of vaping power. Beginners can use replaceable coils, and advanced users can use a serviced base.
There are thirty color options to choose from. The user can choose the color that suits his personal preferences. It is important to note that the serviced base is not included in the standard package, in other words, it must be purchased separately. All other required items are included in the user-supplied kit, including:
- Removable cartridge;
- Coil 0.4 ohm;
- Spare 510 drip tip;
- Charging cable;
- manufacturer’s warranty;
- Instruction for the user.
From the point of view of its dimensions, the device is completely identical to the previous model, the figures are 74.0 * 40.0 * 21.0 mm, which allows you to carry it in your pocket and use it with maximum convenience. Particular attention was paid to optimizing the weight of the device, the result of the work is 74 grams. Detailed study has also affected the design, for this reason at the moment there is a wide choice of color design options for every taste.
The device is powered by a built-in battery with a capacity of 1000 mAh, this figure is the standard. You can replenish the charge in case of reaching low rates using the Micro-USB cable supplied in the kit, you need to find the corresponding connector on the side panel and perform the necessary action.
One of the main advantages of the model under consideration is simply the chipset, its presence provides access to the device’s power control from 1 to 40 watts. Also, the device is equipped with a small screen that displays information about the work, it displays the current charge level, coil resistance, current voltage and power indicators.
One of the important advantages of this device is a fairly simple chipset, with which you can adjust the power of the device from 1 to 40 watts. Naturally, Joyetech Exceed Grip Pro is equipped with a small display with a diagonal of 0.69 inches, on which the vaper can find the standard set of work data – battery level, coil resistance, voltage and power.
The cartridges used in the previous version of the model are suitable for the operation of the device, which greatly simplifies their selection and purchase. Use of cartridges of 3.5 or 4.5 ml is allowed. Installing the cartridge does not take much time, there is a special place for it on the side panel.
The chosen type of cartridge has a great influence on the choice of replacement coils and their installation, the use of coils with a resistance of 0.4 and 0.8 ohm is allowed. It should be noted that the manufacturer has not implemented the airflow adjustment function into the cartridge, this must be taken into account at the stage of device selection.
If necessary, the user can switch to a serviced base, while installing the coil is notable for its simplicity – the deck is made in a standard format with two posts, a horizontal coil installation, there are also large holes for laying cotton wool.
To fill the cartridge, you need to use a special hole, after removing the silicone plug, after that you can fill the tank.